
-
Sensus Regulator 496 : 3/8″, 1/2″, 3/4″, and 1″
Available Sizes
Regular: 3/8", 1/2", 3/4", and 1"
Diaphragm: 4" Molded, roll-out polyester fabric reinforced Buna-N with integral relief seat and case flange seal
Vent and Valve: Precision-fit polypropylene valve and seat, threaded 3/4" or 1" NPT
Adjustment Screw: ABS cycolac
Closing Cap: ABS cycolac with internal relief valve stop and a hole for available tamper seal wire
Corrosion Protection: Chromate converted castings, topcoat enamel,optional E-coat
Internal Relief Valve: Set to relieve at 7" w.c. - 10" w.c. above normal outlet pressure setting of 7" w.c.
For use on other compatible gases, flow capacities must be adjusted using the following correction factors:
Type Gas Sp Grav Corr Factor
Air 1.0 0.77
Propane 1.53 0.63
Propane-air 1.2 0.71
Nitrogen 0.97 0.79
Dry CO2 1.52 0.63
For other non-corrosive gases, the Correction Factor is equal to: √0.6/Specific Gravity
Mounting Positions
These are multi-poised regulators, designed to that they can be mounted in any piping orientation. -
Sensus Regulator 143-80-1 : 3/4″, 1″, 1-1/4″
Sensus residential service regulators have a simple, modern design and rugged construction, offering greater dependability, precise pressure control, and outstanding performance. These are multi-poised regulators, designed to that they can be mounted in any piping orientation. The union nut style connection of the 143-80 makes it especially easy to adjust.
Diaphragm: Nylon fabric reinforced Buna-N with full 26 in2 effective area
Vent and Valve: Precision-fit polyethylene valve and seat, threaded 3/4", 1", 1=1/4" NPT
Corrosion Protection: Cases dip primed chromate conversion coating, topcoat enamel
Internal Relief Valve: none
-
Sensus Regulator 143-80-2 : 3/4″, 1″, 1-1/4″
Sensus residential service regulators have a simple, modern design and rugged construction, offering greater dependability, precise pressure control, and outstanding performance. These are multi-poised regulators, designed to that they can be mounted in any piping orientation. The union nut style connection of the 143-80 makes it especially easy to adjust.
Diaphragm: Nylon fabric reinforced Buna-N with full 26 in2 effective area
Vent and Valve: Precision-fit polyethylene valve and seat, threaded 3/4", 1", 1=1/4" NPT
Corrosion Protection: Cases dip primed chromate conversion coating, topcoat enamel
Internal Relief Valve: Set to relieve at approximately 7" w.c. above normal outlet pressure setting
-
Sensus Regulator 143-80-2HP : 3/4″, 1″, 1-1/4″
Sensus residential service regulators have a simple, modern design and rugged construction, offering greater dependability, precise pressure control, and outstanding performance. These are multi-poised regulators, designed to that they can be mounted in any piping orientation. The union nut style connection of the 143-80 makes it especially easy to adjust.
Diaphragm: Nylon fabric reinforced Buna-N with full 26 in2 effective area
Vent and Valve: Precision-fit polyethylene valve and seat, threaded 3/4", 1", 1=1/4" NPT
Corrosion Protection: Cases dip primed chromate conversion coating, topcoat enamel
Internal Relief Valve: Set to relieve at approximately 7" w.c. above normal outlet pressure setting
-
Sensus Regulator 243-8-1 : 1-1/4″, 1-1/2″, 2″ and 2″ FLGD
Available Sizes
Regular: 1-1/4", 1-1/2", 2"
Flanged: 2"
No IRV
Sensus large capacity industrial service regulators are designed and built for commercial, industrial, and gas distribution use. As a result of the collar connection between the fully inter-changeable bodies and the diaphragm case, they have remarkable field versatility. They are right at home in such places as factories and foundries, district regulator stations, commercial laundries and laundromats, motels-hotels and apartments, bakeries, restaurants, schools, churches and hospitals.
The versatile 243 is used for all kinds of gas fueled equipment .. .boilers, burners, furnaces, ovens, heaters, kilns, engines, air conditioners, etc.
Remarkable field versatility results from the union connection between the fully interchangeable bodies and diaphragm-case assemblies. They are easy to install, adjust, inspect, and service in all piping arrangements.
Depth is affected by mounting position, flanged or screwed connections, diaphragm case size, and whether or not the unit is HP or standard.
Mounting Positions
These are multi-poised regulators, designed to that they can be mounted in any piping orientation.
Other Cases
243 Regulators are mainly used on natural gas. However, they perform equally as well on LP gas, nitrogen, dry CO2 , air and others. Contact us for special construction which may be available for certain corrosive gases. -
Sensus Regulator 243-8-2 : 1-1/4″, 1-1/2″, 2″ and 2″ FLGD
Available Sizes
Regular: 1-1/4", 1-1/2", 2"
Flanged: 2"
Sensus large capacity industrial service regulators are designed and built for commercial, industrial, and gas distribution use. As a result of the collar connection between the fully inter-changeable bodies and the diaphragm case, they have remarkable field versatility. They are right at home in such places as factories and foundries, district regulator stations, commercial laundries and laundromats, motels-hotels and apartments, bakeries, restaurants, schools, churches and hospitals.
The versatile 243 is used for all kinds of gas fueled equipment .. .boilers, burners, furnaces, ovens, heaters, kilns, engines, air conditioners, etc.
Remarkable field versatility results from the union connection between the fully interchangeable bodies and diaphragm-case assemblies. They are easy to install, adjust, inspect, and service in all piping arrangements.
Depth is affected by mounting position, flanged or screwed connections, diaphragm case size, and whether or not the unit is HP or standard.
Mounting Positions
These are multi-poised regulators, designed to that they can be mounted in any piping orientation.
Other Cases
243 Regulators are mainly used on natural gas. However, they perform equally as well on LP gas, nitrogen, dry CO2 , air and others. Contact us for special construction which may be available for certain corrosive gases.

-
Low Capacity: 2 PSIG CSA/ANSI Z21.80 Compliant
Available Models:
30151: 1/2” NPT
30152: 3/4” NPT
30153: 1” NPT
30150: 1/2” NPT
30151: 3/4” NPT
30152: 1” NPT
30153: 1-1/4” NPT
30154: 1-1/2” NPT
30155: 2” NPT
30157F: 3” FLGD
30158F: 4” FLGDCSA design certified Z21.80/ CSA 6.22 Class I Line Gas Pressure Regulator for 2 psig inlet pressure, outlet pressure range of 2 inches W.C. to ½ psig. The GOVERNOR allows for vent limited**, multi-position installation, and positive dead-end lockup for ½” through 4". The GOVERNOR also features double diaphragm, integral vent limiter and external vent limiter with balanced valve design to provide increased capacity and accuracy. The GOVERNOR is suitable for indoor and outdoor installation. The GOVERNOR is also certified ANSI Z21.18 (appliance regulators).
GOVERNOR non-certified models are available from ½" through 4" pipe size, up to 7 psig inlet pressure and 2 psig outlet pressures. Integral slam-shut valves and filters are available. The GOVERNOR gas pressure regulator is suitable for indoor and outdoor installation.
-
Low Capacity: 5 PSIG CSA/ANSI Z21.80 Compliant
Available Models:
30151DC: 1/2” NPT
30152DC: 3/4” NPT
30153DC: 1” NPTPietro Fiorentini's Governor line of gas regulators are designed to comply with the latest CSA and International standards for regulators suitable for indoor or outdoor installations with no modifications.
The Governor family of regulators are ideal for all burner installations and for low pressure gas distribution systems. The materials and soft parts used in the construction of the Governor regulators makes them suitable for use with natural gas, LPG, Propane air and all other non corrosive gases.
All the Governor regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any inlet pressure variation. The double diaphragm provides added security in case of primary diaphragm failure. The integral vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines. The number of regulator options sometimes eliminates the need for separate units and significantly reduced installation costs.
-
Low Capacity: 10 PSIG CSA/ANSI Z21.80 Compliant
Available Models:
30051DC-10 1/2” NPT
30052DC-10 1/4” NPT
30053DC-10 1” NPTPietro Fiorentini's Governor line of gas regulators are designed to comply with the latest CSA and International standards for regulators suitable for indoor or outdoor installations with no modifications.
The Governor family of regulators are ideal for all burner installations and for low pressure gas distribution systems. The materials and soft parts used in the construction of the Governor regulators makes them suitable for use with natural gas, LPG, Propane air and all other non corrosive gases.
All the Governor regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any inlet pressure variation. The double diaphragm provides added security in case of primary diaphragm failure. The integral vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines. The number of regulator options sometimes eliminates the need for separate units and significantly reduced installation costs.
-
High Capacity
Available Models:
30150-1XS: 1/2” NPT
30151-2XS 3/4” NPT
30152-3XS 1” NPT
30153-4XP 1-1/4” NPT
30154-5XP 1-1/2” NPT
30155-6XP 2” NPT
30156F-7XP 2-1/2” FLGD
30157F-7XP 3” FLGD
30158F-8XP 4” FLGDPietro Fiorentini's Governor line of gas regulators are designed to comply with the latest CSA and International standards for regulators suitable for indoor or outdoor installations with no modifications.
The Governor family of regulators are ideal for all burner installations and for low pressure gas distribution systems. The materials and soft parts used in the construction of the Governor regulators makes them suitable for use with natural gas, LPG, Propane air and all other non corrosive gases.
All the Governor regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any inlet pressure variation. The double diaphragm provides added security in case of primary diaphragm failure. The integral vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines. The number of regulator options sometimes eliminates the need for separate units and significantly reduced installation costs.
-
High Capacity: 5 PSIG CSA/ANSI Z21.80 Compliant
Available Models:
30150DC 1/2” NPT
30151DC ¾” NPT
30152DC 1” NPT
30153DC 1-1/4” NPT
30154DC 1-1/2” NPT
30155DC 2” NPT
30156DC 2-1/2” NPT
30157DC 3” FLGD
30158DC 4” FLGDPietro Fiorentini's Governor line of gas regulators are designed to comply with the latest CSA and International standards for regulators suitable for indoor or outdoor installations with no modifications.
The Governor family of regulators are ideal for all burner installations and for low pressure gas distribution systems. The materials and soft parts used in the construction of the Governor regulators makes them suitable for use with natural gas, LPG, Propane air and all other non corrosive gases.
All the Governor regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any inlet pressure variation. The double diaphragm provides added security in case of primary diaphragm failure. The integral vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines. The number of regulator options sometimes eliminates the need for separate units and significantly reduced installation costs.
-
High Capacity: 10 PSIG CSA/ANSI Z21.80 Compliant
10 PSIG CSA/ANSI Z21.80 Compliant
Available Models:
30150DC-10: 1/2” NPT
30151DC-10: 3/4” NPT
30152DC-10: 1” NPT
30153DC-10: 1-1/4” NPT
30154DC-10: 1-1/2” NPT
30155DC-10: 2” NPT
30156DC-10: 2-1/2” NPT
30157DC-10: 3” FLGD
30158DC-10: 4” FLGDPietro Fiorentini's Governor line of gas regulators are designed to comply with the latest CSA and International standards for regulators suitable for indoor or outdoor installations with no modifications.
The Governor family of regulators are ideal for all burner installations and for low pressure gas distribution systems. The materials and soft parts used in the construction of the Governor regulators makes them suitable for use with natural gas, LPG, Propane air and all other non corrosive gases.
All the Governor regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any inlet pressure variation. The double diaphragm provides added security in case of primary diaphragm failure. The integral vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines. The number of regulator options sometimes eliminates the need for separate units and significantly reduced installation costs.