Maxitrol Regulators

Maxitrol Regulators
  • RV-91 2″ and 2-1/2″

    RV-91 2″ and 2-1/2″

    SPECS:
    SizeS: 2″, 2-1/2″
    Capacity (BTU): 7500000
    Description for Maxitrol RV91-2

    All models except RV131 are CSA design certified for 1/2 psi rated pressure under the ANSI standard for gas pressure regulators; and CSA listed to certify compliance with nationally published safety, construction, and performance standards.

    They are main burner only, non-lockup type.They should not be used as a line gas pressure regulator ahead of low pressure controls. Use only where downstream controls can operate at line pressure. Refer to other Maxitrol sales bulletins for proper types. The RV52, RV53 & RV61 are suitable for multipurpose mounting. The RV81, RV91, RV111 & RV131 are recommended for normal horizontal position only.

  • RV-81 1-1/4 and 1-1/2″

    RV-81 1-1/4 and 1-1/2″

    SPECS:
    Sizes: 1-1/4″, 1-1/2″
    Capacity (BTU): 4500000
    Description for Maxitrol RV81-1-1/4

    All models except RV131 are CSA design certified for 1/2 psi rated pressure under
    the ANSI standard for gas pressure regulators; and CSA listed to certify compliance with nationally published safety, construction, and performance standards.

    They are main burner only, non-lockup type. They should not be used as a line gas pressure regulator ahead of low pressure controls. Use only where downstream controls can operate at line pressure. Refer to other Maxitrol sales bulletins for proper types. The RV52, RV53 & RV61 are suitable for multipurpose mounting. The RV81, RV91, RV111, & RV131 are recommended for normal horizontal position only.

  • RV-61 1″ and 1-1/4″

    RV-61 1″ and 1-1/4″

    All models except RV131 are CSA design certified for
    1/2 psi rated pressure under the ANSI standard for gas
    pressure regulators; and CSA listed to certify
    compliance with nationally published safety,
    construction, and performance standards.
    They are main burner only, non-lockup type. They
    should not be used as a line gas pressure regulator
    ahead of low pressure controls. Use only where
    downstream controls can operate at line pressure.
    Refer to other Maxitrol sales bulletins for proper types.
    The RV52, RV53, & RV61 are suitable for multipoise
    mounting. The RV81, RV91, RV111, & RV131 are
    recommended for normal horizontal position only.

  • RV-53 3/4″ and 1″

    RV-53 3/4″ and 1″

    SPECS:
    Size: 3/4″, 1″
    Capacity (BTU): 1300000

    These regulators are main burner only, non-lockup type. They should not be used as a line gas pressure regulator ahead of low pressure controls. Use only where downstream controls can operate at line pressure.

    The RV52, RV53, & RV61 are suitable for multipurpose mounting. The RV81, RV91, RV111, & RV131 are recommended for normal horizontal position only. Maxitrol’s original Straight-Thru-Flow design meets your needs for high capacities at low inlet pressures. The basic difference between Straight-Thru-Flow design and other type regulators lies in the conical valve.

    The cone principal permits gas to flow straight through the regulator without changing directions. Frictional flow resistance is reduced, resulting in greater capacity. The improved flow pattern provides accurate sensitive regulation at extremely low pressure differentials. The ability of the regulator to handle large capacity appliances with limited supply pressure offers a definite advantage to designers of commercial and industrial gas-fired equipment.

    Straight-Thru-Flow appliance regulators are intended for use with all fuel gases, and may also be used with air or other noncorrosive gases within their pressure limits.

  • RV-52 1/2″ and 3/4″

    RV-52 1/2″ and 3/4″

    SPECS:
    Sizes: 1/2″, 3/4″
    Capacity (BTU): 900000

    Maxitrol’s original straight-thru-flow design regulators are main burner only, non-lockup type. Typical applications include residential, commercial, and industrial gas-fired appliances and equipment used on low/medium pressure gas supply.

    They are suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.

  • RV-48 1/2″ and 3/4″

    RV-48 1/2″ and 3/4″

    SPECS
    Sizes: 1/2″ , 3/4″
    Capacity: 230000 BTU


    These rubber seat poppet type regulators are designed primarily for main burner and pilot load applications where precise control of tiny flows is an essential operating requirement.


    Housings are of high strength aluminum die castings. All models, with the exception of D suffix models, have been tested for multi-poise mounting and may be installed in any plane or angle without restriction. D suffix models are to be mounted horizontally. Other than normal upright position will result in slight difference of outlet pressure. They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.