Dresser Meters

For almost a century, Root's Meters have been used for billing of commercial and industrial gas loads. Accuracy, dependability, and low maintenance are of key importance in custody transfer measurement applications. The time-proven Roots meter is the preferred rotary positive displacement meter in distribution, transmission, and production segments for accurate measurement of gas from the well to the burner.

The Roots Series B3 line of gas meters have capacity ratings from 800 CFH to 56,000 CFH with a maximum operating pressure rating of 175 PSIG. Models 8C through 2M are available with a 200 PSIG rating upon request. The five smallest sizes (8C through 3M) have 2" flanged connections, and 6" flange-to-flange dimension. If application requirements change, this unique feature allows a quick and easy meter exchange without the need to re-pipe the meter set. All series B meters utilize the versatile Series 3 accessories. Dresser Roots Series B3 Product Info >

Series B3-HPC high-pressure cartridge rotary meters employ the same positive displacement operating principle where gas volumes are displaced by two figure 8 impellers rotating in a chamber of known volume. Capacities from 1000 to 3000 scfh, pressure rating to 1480 psig, and ANSI 600 raised face flanges (ANSI 300 raised face flanges optional). The measuring cartridges are field replaceable and interchangeable as needs change.

Roots special service meters (Type SSM) are continuous duty meters for measurement of gases where entrained liquids may be present and where the gas being measured may have a corrosive effect on some of the materials employed in meters of standard construction. Typical applications would be in a production pipeline with sour, wet gases or, in a sewage treatment plant to measure gases produced by a sludge digester. Stainless steel and hard-coated aluminum components are throughout. Product Info >

Sensus Meters

SENSUS's Mark II Turbo-Meters insures greater range, compact size, and simplified maintenance when compared to alternative methods of large volume measurement. They are in the forefront of the industry trend toward more sophisticated measurement systems and direct data communications. They incorporate the following features: • Top entry, interchangeable modules • Thrust load balancing bearings • Sealed gears and other moving parts • 30° and 45° blade angles available • Cast aluminum and cast iron bodies • Maximum pressures to 1440 PSI • 2, 3, 4, 6, 8, and 12 inch sizes available Product Info >

		SENSUS's domestic/residential diaphragm meters incorporate the latest concepts with modern engineering materials to provide lighter weight, easier to handle, more durable meters that require less maintenance and offer greater life expectancy. They feature a modular design that reduces repair time and costs. They are available in both temperature and non-temperature compensated versions. Product Info >
		SENSUS's newest line of gas meters uses time-of-flight ultrasonic technology to measure gas flow. They are compact, have no moving parts, tamper resistant, come standard with a 15-year warranty, and are ANSI and CSA approved. They can be used on other fuel gases, and are insensitive to liquid and particulate contaminants. Product Info >

SENSUS's Auto-Adjust® Turbo-meters are designed to provide highly accurate readouts of large volumes, high revenue dollar measurements. They feature dual rotors for self-checking and automatic adjustment of meter performance as well as a sealed module design with integral straightening vanes. Some of the outstanding features include: • Improved retention of calibration accuracy • Automatic adjustment of meter accuracy • Virtually insensitive to deviations in upstream flow • Advanced warning of deteriorating conditions before meter failure occurs Product Info >

Badger Meters

		Badger Meter is a leading marketer and manufacturer of products using flow measurement and control technologies developed both internally and with other technology companies. Its products are used to measure and control the flow of liquids in a variety of applications. Product Info >
		Industrial Turbo Meters, Turbine Flow With its rugged design, the Industrial Turbo Meter can withstand the toughest flow conditions. This meter is ideally suited where continuous service and minimal maintenance are required. It is available in various materials and pressure ratings, and can be combined with Badger's large selection of accessories to suit numerous applications. Applications: HVAC, process water, and low viscosity fluids such as acids, bases, fuels and solvents. Product Info >
		RCDL Disc Meters, Positive Displacement - Nutating Disc The RCDL Disc Meter combines the accuracy of positive displacement design with the reliability and economy of nutating disc technology. Well suited for measuring the flow of water and other fluids, hot or cold, this meter can be combined with most Badger mechanical and electronic accessories for applications from batching to inventory control. Applications: Inventory and process control of cold and hot water, oils, fuels, alcohols, HVAC, condensate return, boiler feed, additive dispensing, and fuel consumption. Product Info >

Primo Mag

The Magnetoflow® magnetic flow meter's advanced design provides high accuracy (typically +/-0.25% of reading) and maintenance free operation over a wide variety of industrial applications. The advanced Primo® microprocessor based electronic converter features user-friendly, intuitive programming software that allows easy setup for specific application needs. Magnetoflow meters are available in standard pipe sizes ranging from 1/4" to 54" (DN6 - DN1400). Flanged, wafer and 3A approved sanitary connections are available. Product Info > Applications: Industrial liquids, raw water, wastewater and water conditioning, HVAC, and process control. Technical Brief > Wafer