SENSUS        Maxitrol SENSUS SENSUS's service regulators have a simple, modern design and rugged construction, offering greater dependability, precise pressure control, and outstanding performance. They are designed to be installed in numerous mounting positions and are simple to adjust and service. The union nut style connection on the 143-80 makes it especially easy to adjust. SENSUS's large capacity industrial service regulators are designed and built for commercial, industrial, and gas distribution use. As a result of the union connection between the fully interchangeable bodies and the diaphragm case, they have remarkable field versatility. They are easy to install, adjust, inspect, and service in all piping arrangements. SENSUS's field and high pressure service regulators combine simplicity of design with rugged construction, exceptional performance, and operational safety to provide dependable, flexible, and economical answers for pounds-to-pounds pressure regulation applications. They are easy to install, adjust, inspect, and service in all piping arrangements. SENSUS's industrial combustion regulators combine new technology with modern design to provide greater capacity, higher inlet pressure, more accurate performance, and faster speed of response. In most cases, this will allow the use of a smaller regulator. They have high strength, corrosion resistant, die-cast diaphragm cases and cast iron bodies, assuring a highly functional regulator at a better price. The models incorporate soft seat valve material plus a precision-machined "knife edge" orifice to provide a positive, tight shutoff. SENSUS also manufactures intermediate capacity, pilot operated, self-operated and extreme high-pressure regulators for high flows and exceptionally fast response. All of SENSUS's regulators are designed to be used with natural gas, as well as LPG vapor, air, oxygen, dry CO2, nitrogen, and other inert gases. All models can be used indoors or outdoors, and have operating temperature range from -20 ¡ f to 150 ¡ f, and are not recommended for buried service. Models: 496, 143, 243, 046, 141-A, 121, 122, 461, 441, 243-RPC Maxitrol regulators Maxitrol Company manufactures a complete line of gas appliances and line regulators for domestic, commercial, and industrial needs. Models available for both low and intermediate pressure applications. The poppet model RV Series is designed primarily for main burner and pilot load applications. They are available from 1/8" to 3/4" pipe size and rated for up to 1/2 psi. The straight-through-flow RV Series, size for size, has the highest capacity of any regulator design available. They are best used when supply pressure is low enough to cause concern about pressure drop. They are available from 1/2" to 4" pipe size. The balanced valve R, RS and 210 series are designed for use with intermediate pressure. The balancing diaphragm virtually eliminates inlet pressure supply fluctuations. The R and RS series are available from 3/8" to 1" pipe size and rated for up to 5 psi. The 210 series is available from 1" to 4" pipe size and rated for up to 10 psi. The lever acting 325 Series is a pounds to inches regulator, ideally used to reduce intermediate pressure to a level usable by standard low-pressure controls. They are available from 3/8" to 1 1/2" pipe size and rated for up to 10 psi. They are commonly used in 2 lb. Or 5 lb. Systems. The SR Series 2 stage regulators provide an economical means of flame staging where infinite modulation is not required. Turn down on low fire is from 25% to 75% of high fire flow rates to 1,000 CFH. They are available from 3/8" to 1" pipe size and rated for up to 1 psi. For more info click here.